Tests performed by NTA, Inc. include, but are not limited
to, the following:
C514 |
Standard Specification for Nails for
the Application of Gypsum Board |
|
C955 |
Load-Bearing (Transverse and Axial)
Steel Studs, Runners (Tracks), and Bracing or Bridging
for Screw Application of Gypsum Board and Metal Plaster
Bases |
|
D1761 |
Standard Test Methods for Mechanical
Fasteners in Wood |
|
E489 |
Standard Test Method for Tensile Strength
Properties of Metal Connector Plates |
|
E767 |
Standard Test Method for Shear Strength
Properties of Metal Connector Plates |
|
F1667 |
Standard Specification for Driven: Nails,
Spikes, and Staples |
|
AISI Chapter F |
Tests for Special Cases (Bolted and
Screw Connections) |
|
ANSI A225.1
Sec. 3-2.8 |
Anchoring Equipment Testing |
|
ANSI A225.1
Sec. 3-2.8.4 |
Tie Material Properties Testing |
|
ANSI A225.1
Sec. 3-2.9.1 |
Ground Anchor Capacity Testing |
|
ANSI/TPI 1
Sec. 7.1 |
Standard Method of Test for Determining
Lateral Resistance Strength of Metal Connector Plate
Teeth |
|
ANSI/TPI 1
Sec. 7.2 |
Standard Method of Test for Strength
Properties of Metal Connector Plates Under Pure Shear
Force |
|
ANSI/TPI 1
Sec. 7.3 |
Standard Method of Test for Strength
Properties of Metal Connector Plates Under Pure Tension
Forces |
|
FMHCSS
24CFR
§3280.306 (f) |
Anchoring Equipment Load Resistance
Test |
|
SBCCI H105.4.5 |
Tie Material Properties Testing |
|
SBCCI H105.5.2 |
Ground Anchor Capacity Testing |
NTA, Inc. can aid in the development of assessment of any
new or existing component. We can develop test methods and
fixtures for testing virtually any assembly under any loading
condition. Product
testing provides a better understanding of behavior and
capabilities; giving valuable guidance for product improvement
and development.
